20Slide the electronics bay back into the chassis and secure it in place with the four screws you removed in Step 5.
21Reconnect the system cables to the appropriate connectors on the system board. See “System board” on page 13 for reference.
22Replace the expansion cards and connect any required cables to the expansion cards.
23Close the case. (See “Closing the case” on page 31.)
24Reconnect all peripherals and the power cord, then turn on the server.
25Open the BIOS setup utility and correct any inaccurate settings. (See “About the BIOS Setup utility” on page 111 for more information.)
110Replacing and Adding Internal Devices