7Align the rails on the new power supply module with the grooves at the top and bottom of the power supply and slide the power supply module in.

8Slide the module all of the way into the space until the clip at the top clicks into place, then tighten the thumbscrew at the bottom of the power supply module.

9Replace the bezel.

Replacing the power supply

The redundant 350-W power supply provides all system power. If one of the components of the power distribution hardware fails, you must replace the entire power supply.

To replace the power supply:

1Turn off the server and disconnect the power cord and all peripherals.

2Remove the bezel and the front top panel. (See “Removing the bezel” on page 27, “Removing the front top panel” on page 29, and “Preventing static electricity discharge” on page 25.)

84Replacing and Adding Internal Devices