To remove a hot-swap drive:

1Follow the static electricity precautions in “Preventing static electricity discharge” on page 25.

2Use the SCSI control software to stop activity on the drive you need to remove.

3Open the bezel door as described in “Opening the bezel door” on page 27.

4Pinch the grip of the drive carrier handle to release the clip at the top.

5Swing the carrier handle down and pull the drive out of the drive cage. Continue pulling until the drive is entirely out of the drive cage.

6Place the drive on a static-free surface. If you are replacing the drive, see “Installing a hot-swap drive” on page 38.

Drives 37