4Use the four screws you removed in Step 3 to secure the new drive to the drive carrier.
5With the drive carrier handle in the open position, align the drive carrier rails with the grooves at the top and bottom of the drive bay.
6Slide the drive into the bay until the handle starts to close. Make sure the tab on the bottom of the handle fits into the slot on the bottom of the drive cage.
Tab
Slot
7Close the handle securely to set the drive connector into the connector at the back of the drive cage.
8Close the bezel door.
9Use the SCSI control utility to format and configure the new drive.
Drives 39