To replace a 5.25-inch device:

1Turn off the server and disconnect the power cord and all other external peripheral devices.

2Remove the bezel. (See “Removing the bezel” on page 27.)

3Remove the front top panel. (See “Removing the front top panel” on page 29 and “Preventing static electricity discharge” on page 25.)

4Disconnect the power and data cables from the device. If you intend to install a replacement device, note the location and orientation of the cables to make installing the replacement device easier.

5Pinch the front ends of the drive rails toward the center of the drive bay, and pull the drive out of the bay.

Drives 51