To remove the bezel:

1Grip the bezel at both sides and pull it straight out from the front panel.

Removing the back top panel

The back top panel provides access to the hot-swap fans, the hot-swap PCI slots, the memory card, the processors and VRMs, and the standard PCI slots.

To remove the back top panel:

1Observe all safety and static electricity precautions, see “Preventing static electricity discharge” on page 25.

Important You do not have to turn off the server to open the back top panel. However, do not remove the EMI foam from the electronics bay unless you have turned the server off and unplugged the power cord.

28Case Access