System problems
The system will not start up
Probable cause | Solution |
|
|
The system is not connected to | Make sure that the power cable is connected to an |
an AC outlet | operating AC power source. |
|
|
Voltage selection switch not | Make sure that the voltage selection switch is set to |
set correctly | the correct power source. |
|
|
A power supply module has | Power supply alarm buzzes and power supply status |
failed | LED blinks indicating a failed power supply module. |
| Replace the indicated power supply module. (You can |
| turn off the audible alarm by inserting an appropriate |
| tool into the port on the front panel and pressing the |
| switch.) |
|
|
The power supply has failed | The power supply alarm buzzes and all power supply |
| status LEDs blink, indicating a failed common |
| component. |
| Replace the entire power supply housing. (One or |
| more of the power supply modules may also be bad.) |
|
|
The system is non-responsive
Probable cause | Solution |
|
|
An error occurs during an | Restart your server by pressing the reset button. If the |
application or the server | system is still |
may be out of memory | button for 4 seconds to turn the server off. Turn the server |
| back on, then follow the |
|
|
Keyboard, mouse, and front | Enter the password. |
panel are locked out when |
|
the password is set |
|
|
|
The keyboard does not work
Probable cause | Solution |
|
|
Keyboard is locked out | Enter the password. |
when the password is set |
|
|
|
138Troubleshooting