12Secure the hot-swap backplane in placed with the four screws you removed in Step 8.

13Align the four rails on the sides of the drive cage with the grooves in the chassis and slide the hot-swap drive cage back into the chassis.

14Install all of the hot-swap drive carriers as described in “Installing a hot-swap drive” on page 38.

15Reconnect the cables to the hot-swap backplane.

16Replace the front top panel as described in “Replacing the front top panel” on page 31.

17Plug in the peripherals and the power cord and turn on the server.

44Replacing and Adding Internal Devices