9Replace the memory board retention bracket, hooking the tab over the edge of the electronics bay and replacing the screw in the back panel.
10Close the case. (See “Closing the case” on page 31.)
11Reconnect the peripherals and the power cord, then turn on the server.
Processors
The server is compatible with the Intel® Pentium® III 550 MHz and faster processors with 100 MHz FSB. As many as four processors may be installed in the server (they must have the same processor and FSB speed). Processor and FSB speed are automatically detected by the server. Processors must be installed in order, from slot 1 through slot 4 and a VRM must be installed for each processor added to the server. Whenever processors are installed, the most current version of the BIOS should be installed as well (see “Updating the BIOS” on page 113).
Processors 61