GE 1601-0149-A2 manual Analog Inputs Point List Sheet 1, Assigned to

DNP Point Lists

Analog Input / Input Change (Objects 30/32)

489

Communications Guide

In the following table, the Format column indicates that the associated data point format is determined by the entry in Data Formats on page 40. For example, an “F1” format is described in that table as a (16-bit) unsigned value without any decimal places. Therefore, the value read should be interpreted in this manner. Many of the values reported by the 489 have a size of 32-bits and have had their upper and lower 16-bit components assigned to separate points. Where indicated, refer to the appropriate note following the table for more detail.

Table 8: Analog Inputs Point List (Sheet 1 of 4)

INDEX	FOR-	DESCRIPTION	EVENT CLASS	NOTES
	MAT		ASSIGNED TO
0	F133	Generator Status	Class 1	Note 3
1	F1	Generator Thermal Capacity Used	Class 1
2	F1	Estimated Trip Time On Overload	Class 1
		(seconds, 65535 means never)
3	F134	Cause Of Last Trip	Class 1	Note 3
4	F19	Time Of Last Trip (Upper 16 Bits)	Class 1	Notes 3,4
5	F19	Time Of Last Trip (Lower 16 Bits)	Class 1	Notes 3,4
6	F18	Date Of Last Trip (Upper 16 Bits)	Class 1	Notes 3,4
7	F18	Date Of Last Trip (Lower 16 Bits)	Class 1	Notes 3,4
8	F1	Tachometer Pre-Trip	Class 1	Note 3
9	F1	Scale factor for pre-trip current readings	Class 1	Note 3
		(pre-trip points marked with “Note 6”).
		Will always be a power of 10 (1, 10, 100,
		etc.). Changes only when the configuration
		setpoints are changed.
10	F1	Phase A Pre-Trip Current	Class 1	Notes 3, 6
11	F1	Phase B Pre-Trip Current	Class 1	Notes 3, 6
12	F1	Phase C Pre-Trip Current	Class 1	Notes 3, 6
13	F1	Phase A Pre-Trip Differential Current	Class 1	Notes 3, 6
14	F1	Phase B Pre-Trip Differential Current	Class 1	Notes 3, 6
15	F1	Phase C Pre-Trip Differential Current	Class 1	Notes 3, 6
16	F1	Pre-Trip Negative Sequence Current	Class 1	Note 3
17	F1	Ground Current Scale Factor. Will always	Class 1	Note 3
		be a power of 10 (1, 10, 100, etc.).
		Changes only when the configuration
		setpoints are changed.
18	F6	Pre-Trip Ground Current (scaled according	Class 1	Note 3
		to previous setpoint)
19	F1	Phase A-B Pre-Trip Voltage	Class 1	Note 3
20	F1	Phase B-C Pre-Trip Voltage	Class 1	Note 3
21	F1	Phase C-A Pre-Trip Voltage	Class 1	Note 3
22	F3	Pre-Trip Frequency	Class 1	Note 3
23	F1	Pre-Trip Real Power (MW)	Class 1	Notes 3,8
24	F1	Pre-Trip Real Power (kW)	Class 1	Notes 3,8
25	F1	Pre-Trip Reactive Power (Mar	Class 1	Notes 3,8
26	F1	Pre-Trip Reactive Power (kvar)	Class 1	Notes 3,8
27	F1	Pre-Trip Apparent Power (MVA)	Class 1	Notes 3,8
28	F1	Pre-Trip Apparent Power (kVA)	Class 1	Notes 3,8
29	F1	Last Trip Stator RTD	Class 1	Note 3
30	F4	Last Trip Hottest Stator RTD Temperature	Class 1	Note 3
		(°C)
31	F1	Last Trip Bearing RTD	Class 1	Note 3
32	F4	Last Trip Hottest Bearing RTD Temperature	Class 1	Note 3
		(°C)
33	F1	Last Trip Other RTD	Class 1	Note 3
34	F4	Last Trip Hottest Other RTD Temperature	Class 1	Note 3
		(°C)

GE Multilin

http://www.GEindustrial.com/multilin

53