2

Installing an IC693CPU364 with Embedded TCP/IP Ethernet Interface

The CPU364 with Embedded Ethernet Interface is mounted on the Series 90-30 PLC baseplate. It is connected to an Ethernet network via a 10Base-T port or a user-provided transceiver cable and transceiver via an AAUI port.

IC693CPU364 Series 90-30 CPU Module with Ethernet Interface

EOK

PS

 

PORT

LAN

CPU364

STAT

ON

 

 

OFF

 

ETHERNET

 

RESTART

 

STATION

 

MGR

 

RS-232

 

AAUI

 

10BASET

RESTART

PUSHBUTTON

 

 

 

 

DEFAULT

SERIAL

 

 

 

 

STATION

 

 

 

 

NUMBER

 

 

FUSE

ADDRESS

 

 

LABEL

 

 

 

 

LABEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Series 90-30 CPU364 has several user-accessible elements (only the Ethernet Interface elements are discussed here.)

Three Ethernet LEDs are located at the top left of the board. The Ethernet Restart pushbutton is located below the LEDs. The RS-232 serial port with the RJ-11 connector (similar to a modular telephone connector) is used to connect to Station Manager and to load software updates. Below the serial port are two ports, either one of which can be used to connect to the Ethernet network: the 14-pin AAUI connector (Transceiver port) and the 10Base-T, RJ-45 network port.

The default station address (MAC address) label, serial number label, and replaceable AAUI port fuse are concealed by the front cover. The front cover must be removed to access these items.

2-16

TCP/IP Ethernet Communications for the Series 90™ PLC User's Manual– May 2002

GFK-1541B

Page 29
Image 29
GE GFK-1541B manual IC693CPU364 Series 90-30 CPU Module with Ethernet Interface