![](/images/new-backgrounds/1193598/19359869x1.webp)
2 |
CPU364 Configuration
Before you can use the Ethernet Interface with the Series
For the Ethernet Interface specifically, the configuration software allows you to:
Define the Status address of the Ethernet Interface.
Assign the IP address for the Ethernet Interface, and optionally the subnet mask, the gateway address, and the name server address.
Configure the serial ports (optional).
Configuring the Interface Using
To configure the Ethernet Interface using Logic Developer, Control or VersaPro programming software, do the following:
1. In Control and VersaPro, from the Browser,
2. In Control and VersaPro, click the Main tab.
3. Click the CPU slot, press the right mouse button, and choose Replace Module. The Module Catalog dialog box will appear.
4. In the Module Catalog dialog box, select CPU model IC693CPU364, then click the OK button. Follow the instructions on the screen until the Parameters dialog box appears.
5. The Parameters dialog box will allow you to edit the module’s parameters. To edit a parameter value, click the desired tab, then click in the appropriate Values field. The Settings, Scan, and Memory tabs contain parameters that pertain directly to CPU operation. Refer to Online Help for more information.
6. The Ethernet and
Interface’s functionality. Some fields in the Ethernet tab must be filled in. The default settings for the
7. If you want to view the power consumption of this module, click the Power Consumption tab. After you have configured all of the module’s applicable parameters, click the OK button. The module will now appear in the selected slot.
8. Store the configuration to the PLC so these settings can take effect.
For more information, refer to Online Help in the PLC programming software.
TCP/IP Ethernet Communications for the Series 90™ PLC User's Manual– May 2002 |
|