GE GFK-1541B manual Contents

Contents

Chapter 1	Introduction	1-1
	The Ethernet Interface	1-2
	Ethernet Interface Ports	1-4
	The Station Manager Software	1-7

Chapter 2	Installation	2-1
	Installing an IC693CMM321 Ethernet Interface Module	2-2
	Installing an IC693CPU364 with Embedded TCP/IP Ethernet Interface	2-16
	Installing an IC693 CPU374 with Embedded TCP/IP Ethernet Interface	2-30
	Installing the IC697CMM742 Ethernet Interface	2-41

Chapter 3	Programming SRTP Channel Commands	3-1
	The Communications Request	3-2
	COMMREQ Function Block and Command Block	3-6
	Channel Commands	3-9
	Status Data	3-31
	Controlling Communications in the Ladder Program	3-43

Chapter 4	Programming Modbus/TCP Channel Commands	...........................................4-1
	The Communications Request	4-2
	COMMREQ Function Block and Command Block	4-5
	Modbus TCP Channel Commands	4-8
	Status Data	4-20
	Controlling Communications in the Ladder Program	4-26

Chapter 5	Ethernet Global Data	5-1
	Overview of EGD	5-2
	Configuring EGD	5-12
	Adapter Names, Aliases, and Groups	5-21
	Exchange Status Word	5-23
	Simple Network Time Protocol (SNTP)	5-25

Chapter 6	Network Administration Support	6-1
	IP Addressing	6-2
	Gateways	6-4
	Subnets and Multiple Gateways	6-5
	Configuring Multiple Gateways	6-7
	Network Address Naming Architecture	6-9

GFK-1541B iii