George Foreman GR70CAN Before Using for the First Time, LID AND LID HANDLE ASSEMBLY, GENERAL PROCEDURES

Before Using for the First Time

LID AND LID HANDLE ASSEMBLY

1.Locate the Lid Screw and rubber washer from inside the packing.

2. Position the Handle on the outside of the Lid, at its top-

most point. Fit screw and rubber washer through the hole on top of the Lid. Then screw the Lid Handle to the top of the Lid. Hand tighten until the Handle is secure. (See sketch .) The Handle

must always be on the exterior of the Lid during cooking.

3.Periodically check to make sure the Handle is securely fastened onto the Lid. Always tighten by hand; do not over tighten.

GENERAL PROCEDURES

•Make sure the appliance is unplugged. Remove the Temperature Control Probe and Party Time Grill!™ Pan, set- ting both aside.

•ALWAYS make sure the Grease Tray is empty before removing the Pan from the Base.

•To detach the Pan, from the Housing Base, gently push the Pan Release towards the Pan to release. Then carefully lift the Pan from the Base, at the Grease Tray end, pulling it up and towards you.

•Completely wipe the Party Time Grill!™ Pan with a damp cloth to remove all dust. Apply a thin coating of cooking oil and wipe out any excess with a paper towel for easy main- tenance for next use.

•Wash Housing Base, Lid, Fusion Cup, Grill Tongs, Grease Tray, and Skewers with warm, sudsy water and rinse. Dry thoroughly before attaching the Party Time Grill!™ Pan and inserting the Temperature Control Probe.

8