12.0 Redirects: Plug-ins, Sends & Inserts
Sends
When a new send is create, a window for configuring the Send will immediately appear. By default, Sends have no outputs and must be configured as needed. Click "add" to add ports, and connect them to the destination that should receive the output of the send (shown in the second picture, below)
•Add/Remove: adds/removes a Jack port to the send.
•Disconnect All: disconnects all Jack ports (does not remove ports)
•Available connections: This is a list of all the available Jack connection ports, with one tab for each Jack appli- cation, and one for the system sound I/O ("system").
%Note: The number of "ports" created will define the channels of the send. Sends can have 1 (mono), 2 (stereo) or more (multichannel) ports assigned.
After a send has been configured, a
%Note: Sends are created "deactivated", you must Activate the send before it will work.
In addition to the output management, The Send Editor also has a volume slider and a panner (if the number of outputs is > 1).
Section 12.0 - Redirects: | 22 | Mixbus User Guide |
