data plate
drain handle
drain interlock switch
drain valve
dumping table
fill lines
filter clips
filter drain pan filter envelope
filter heater switch filter pan dolly filter pump motor filter screen assembly
filter union
filter valve
flame sensors (gas fryers only)
fryer brush frypot
frypot collar
Model OFG- 390
a label or plate located on the right side panel of the fryer that indicates the fryer type, serial number, warranty date, and other information
the handle used to open and close the drain valve
a microswitch that automatically shuts off the fryer heat in the event the drain valve is inadvertently opened while the fryer power switch is in the ON position
a valve that allows the shortening to drain from the frypot into the filter drain pan; the fryer power switch should be in the OFF position before the drain valve is opened; the drain valve should remain closed at all other times
a table onto which the cooked product is dumped after removal from the fryer frypot
the four lines marked on the interior real wall of the frypot that show the proper shortening level (also referred to as level indictor lines)
the clips are the part of the filter screen assembly that holds the filter envelope closed
a pan that slides under the fryer into which shortening is drained
a fiber envelope into which the filter screen is placed; the end of the envelope is folded and held closed with filter clips; a part of the filter screen assembly
control panel switch that activates the strip heater (Model
an optional transport cart for the filter drain pan
the motor that powers the filtering system
an assembly that filters the shortening as it is pumped from the frypot; the assembly is made up of two filter screens, a filter envelope, two filter clips, and a crumb catcher (Note: eight head fryers have two filter screens with no crumb catcher)
the threaded connection between the fryer and the filter system that can be connected or released without tools
the valve that must be opened to pump shortening back into the frypot during the filter cycle (Models
the sensors that shut off the gas supply to gas fryers if the pilot lights go out or do not light
a brush included with the fryer used to scrub the inside of the frypot
the interior portion of the fryer that holds the shortening and the product while cooking
the top flat surface area around the fryer lid
303
