Henny Penny OFG-390 manual Installation

Model OFG- 390

	SECTION 2. INSTALLATION
2-1. INTRODUCTION	This section provides the installation and unpacking instructions for
	the Henny Penny OFG-390, open fryer.
	Installation of this unit should be performed only by a qualified
	service technician.

Do not puncture the unit with any objects such as drills or screws as component damage or electrical shock could result.

2-2. UNPACKING INSTRUCTIONS

Any shipping damage should be noted in the presence of the delivery agent and signed prior to his or her departure.

1.Cut and remove the metal bands from the carton.

2.Remove the carton lid and lift the main carton off the fryer.

3.Remove corner packing supports (4).

4.Cut the stretch film from around the carrier/rack box and remove it from the top of the fryer lid.

4.Cut and remove the metal bands holding the fryer to the pallet.

All counterweights must be loaded before unlatching the lid, or personal injury could result.

5.Remove the fryer from the pallet.

Take care when moving the fryer to prevent personal injury. The fryer weighs approximately 670 lbs. (304 kg).

803 2-1