HP 130 manual Sheet paper Roll paper

English

HP Designjet 30/90/130 Printer series – Quick Reference Guide

How Do I Load Sheet Paper Using the Rear Path? (continued)

If your printer has two slots, you must feed the sheet through the upper slot (the lower slot is for roll paper only).

Sheet paper

Roll paper

4.Align the left edge of the paper with the left mark on the rear feed. If you do not see a mark, align it with the paper stop near the left-hand end of the roll feed spindle. Make sure that the leading edge of the sheet is parallel to the slot and aligned properly.

5.Push the paper into the printer, pushing it as far as it will go. For best results you should push the paper in quickly rather than slowly.

12