HP Designjet 130 (24.6 × 63.9 inches) (D+ or A1+), How Do I Load Sheets of Paper? (General Guidance) (continued)

HP Designjet 30/90/130 Printer series – Quick Reference Guide

How Do I Load Sheets of Paper? (General Guidance) (continued)

•110 × 205 mm (4.3 × 8.1 inches) and 625 × 1625 mm (24.6 × 63.9 inches) (D+ or A1+). (130 printer)

The rear path (upper slot) is also used for roll input if your printer has the manual roll feed installed.

4.The rear path (lower slot) is used for roll input if your printer has the Automatic Roll Feed installed (HP Designjet 130 only).

The extensions may be used to support large sheets of paper going into the front input path, and also act as supports for paper arriving in the output tray.

Important: If you wish to print to a sheet and there is a roll of paper loaded in the printer, the roll must be unloaded to allow printing to the sheet. If you are using the 90 Printer series, see “How Do I Unload a Roll of Paper? (90 Printer series)” on page 15. If you are using the 130 printer, see “How Do I Unload a Roll of Paper? (130 Printer series)” on page 18.

5

English