English |
HP Designjet 30/90/130 Printer series – Quick Reference Guide
How Do I Load Sheets of Paper? (General Guidance)
There are four ways of loading sheets of paper into the printer if you have the Automatic Roll Feed installed on your printer. There are three ways of loading paper if you have the manual roll feed or no roll feed installed:
extensions | output tray |
to support | |
paper |
|
2. front path
3.rear path (sheet/ manual 
roll)
4. rear path 
(auto.
roll)
1. input tray
1.The input tray at the front of the printer for normal sheets of paper between:
•76 × 142 mm (3 × 5.6 inches) and 457 × 610 mm (18 × 24 inches) (C+ or A2+). (90 and 130 printer series)
•95 × 146 mm (3.74 × 5.75 inches) and 330 × 483 mm (13 × 19 inches). (30 Printer series)
Envelopes can also be loaded in the input tray.
2.The front path for paper between:
•95 × 146 mm (3.74 × 5.75 inches) and 330 × 483 mm (13 × 19 inches). (30 Printer series)
•152 × 229 mm (6 × 9 inches) and 458 × 1625 mm
(18.03 × 63.9 inches) (A2 oversize). (90 Printer series)
•110 × 205 mm (4.3 × 8.1 inches) and 625 × 1625 mm (24.6 × 63.9 inches) (D+ or A1+). (130 printer)
3.The rear path (upper slot), for single thick sheets of paper or other media between:
•95 × 146 mm (3.74 × 5.75 inches) and 330 × 483 mm (13 × 19 inches). (30 Printer series)
•76 × 205 mm (4 × 8.1 inches) and 458 × 1625 mm (18.03 × 63.9 inches) (A2+). (90 Printer series)
4
