HP Designjet 30/90/130 Printer series – Quick Reference Guide

How Do I Print the Printer Information Pages?

Before you begin, make sure there are at least three sheets of blank paper in the input tray (A4- or Letter-size is sufficient).

While holding the Power key down, press the OK key (upper right key) four times. Three pages with information about the printer and its peripherals will be printed.

How Do I Test My Printer?

When you have set up your printer and periodically after maintenance, you may want to do a test print to check the printer configuration is working and that the print quality is good.

To do a test print…

1.Make sure that you have a blank sheet of A4 or Letter paper, or a roll of paper at hand.

2.Run the HP Designjet System Maintenance utility as described in “How Do I Use HP Designjet System Maintenance?” on page 40.

3.Select Check image quality.

4.Follow the on-screen instructions.

41

English