English |
HP Designjet 30/90/130 Printer series – Quick Reference Guide
The Problem is the Input Tray Will Not Fit Properly
If you have problems inserting the input tray securely, try inserting and removing the tray two or three times. Normally this should resolve the problem. If not, check that the latches are correctly positioned.
Note that the illustration below shows the HP Designjet 90&130 Printer series.
Inside the slot where the tray goes, there are three
Make sure that both latches are forward. If necessary, pull them towards you.
When you insert the tray, you should hear a click as the latches are pushed back; when you remove the tray, the latches click as they move forward.
42
