English |
HP Designjet 30/90/130 Printer series – Quick Reference Guide
The Problem is there is a Printhead Failure
If a printhead fails or needs attention, the corresponding printhead icon on the front panel flashes.
Make sure the printhead is correctly seated. If this is not the problem, the most likely cause of failure is that the printhead contacts need to be cleaned. You will need the following cleaning materials:
•Clean, soft,
•Distilled or filtered water
•Paper towels
Make sure the printer is powered on, then do the following:
1.Open the front hinged flap at the right of the printer.
2.Open the second (back) part of the flap and lift it back fully. The print carriage will move to the left and then back to the right. Wait for it to stop. When the carriage has stopped moving, unplug the power cable from the printer.
46
