HP 9470m i7 Win8 D3K33UT#ABA manual Hard drive/SSD drive, Msata Ssd

Hard drive/SSD drive

NOTE: The hard drive spare part kit does not include the hard drive bracket, connector, or screws.

The solid-state drive spare part kit includes the Hard Drive Hardware Kit, which includes the bracket, connector, and screws..

Description	Spare part number
Hard drive (does not include hard drive bracket or screws):
500-GB, 7200-rpm, 7-mm SED	703268-001
500-GB, 7200-rpm, 7-mm	703267-001
320-GB, 7200-rpm, 9.5-mm	603783-001
Solid-state drive (includes bracket, connector, and screws):
256-GB, SATA III, self-encrypting drive (SED)	702865-001
180-GB, SATA III	702864-001
mSATA SSD:
256-GB mSATA	702866-001
32-GB mSATA	702867-001
24-GB mSATA	702868-001
Hard Drive Hardware Kit (includes hard drive bracket, connector, and screws)	702870-001

Before removing the hard drive, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

4.Remove the battery (see Battery on page 41).

5.Remove the hard drive cover (see Hard drive cover on page 47).

Remove the hard drive:

1.Loosen the 4 captive hard drive screws (1) that secure the drive to the computer.

2.Pull the hard drive tab (2) upward to disconnect the hard drive.

48 Chapter 4 Removal and replacement procedures