Fan
Description | Spare part number |
|
|
Fan (includes cable) |
|
|
|
Before removing the fan, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 41).
a.Hard drive cover (see Hard drive cover on page 47)
b.Hard drive (see Hard drive/SSD drive on page 48)
c.Service cover (see Service cover on page 53)
d.Keyboard (see Keyboard on page 60)
e.Base enclosure (see Base enclosure on page 63)
Remove the fan:
1.Disconnect the fan cable (1) from the system board.
2.Loosen the 2 captive Phillips screws (2) that secure the fan to the top cover.
3.Remove the fan (3).
Reverse this procedure to install the fan.
68 | Chapter 4 Removal and replacement procedures |
