HP 9470m i7 Win8 D3K33UT#ABA Base enclosure, a. Hard drive cover see Hard drive cover on page

Base enclosure

Description	Spare part number
Base enclosure	702863-001

Before removing the base enclosure, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

4.Remove the battery (see Battery on page 41), and then remove the following components:

a.Hard drive cover (see Hard drive cover on page 47)

b.Hard drive (see Hard drive/SSD drive on page 48)

c.Service cover (see Service cover on page 53)

d.Keyboard (see Keyboard on page 60)

Remove the base enclosure:

1.Close the computer and position it upside down.

2.Remove the WLAN (1) and WWAN (2) antennas from the routing path (3) in the base enclosure.

Component replacement procedures 63