mSATA drive
Description | Spare part number |
|
|
|
|
|
|
|
|
Before removing the mSATA drive follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 41).
5.Remove the hard drive cover (see Hard drive cover on page 47).
Remove the mSATA drive:
1.Remove the two Phillips PM2.0×3.0 screws (1) that secure the drive to the system board. (The drive tilts up.)
50 | Chapter 4 Removal and replacement procedures |