HP 9470m i7 Win8 D3K33UT#ABA manual Select Computer More applications Tools Create Recovery USB

the system to the original factory state when the F11 recovery option is not available. This process should be done on first obtaining the computer.

CAUTION: The USB recovery option does not preserve data present on the computer’s hard drive or on the Disk On Key used for the recovery process. Back up any data on the Disk on Key or the notebook that will be recovered before starting.

NOTE: HP recommends that you create the USB Recovery Disk in the event of a system failure. The Disk On Key used for this process should be 4 GB or larger.

Creating a USB Recovery Disk On Key

1.Connect the USB Disk On Key to a USB port on the computer.

2.Select Computer > More applications > Tools > Create Recovery USB.

3.Enter the root password when prompted.

4.Select USB Disk On Key from the list.

5.Click OK.

6.A question dialog will remind you that the data on the USB key will be destroyed. To continue, click OK. Otherwise, click Cancel and back up the contents of the Disk On Key on another computer.

7.The backup process will display a status dialog box while the backup is in progress.

NOTE: A file browser window with the Disk On Key Contents displayed will pop up when the key is mounted. You may close the file browser window if desired. Once the USB Recovery Key has been created, the status dialog will close. The USB Recovery Key is ready for use.

Recovering from a USB Recovery Disk On Key

CAUTION: Before starting the Recovery process, make sure any data on the system to be recovered has been backed up. The recovery process destroys all data on the system to be recovered.

1.Turn off the computer.

2.Connect the USB Disk On Key to a USB port on the computer.

3.Turn on the computer while holding down the f9 key.

4.Once the system has booted, the Boot Options menu should appear.

5.Using the arrow keys, select USB Disk On Key and press enter.

NOTE: The description may vary from one USB key to another. Any entry other than Optical Disk Drive, Notebook Hard Drive or Notebook Ethernet should be the USB Recovery Disk On Key.

6.Once the USB Recovery Disk On Key has been selected, press enter. The USB Recovery Disk On Key will boot.

7.Once the USB Recovery Disk On Key has booted, a dialog box will prompt, “Do you want to start the System-Restore?” If data on the computer has not been backed up, use the tab key and select No. The system will reboot. Back up the system data and repeat the previous steps. If no data

118 Chapter 7 Backup and recovery