HP C4472, C4485, C4435 manual Door open, Firmware revision mismatch, Memory is full, Scanner failure

Models: C4435 C4472 C4440 C4485

1 243
Download 243 pages 17.98 Kb
Page 153
Image 153

Chapter 13

Follow the prompts on the display to continue. Cause: The print carriage was blocked.

Door open

Solution: Close the print cartridge door.

Troubleshooting

Cause: The print cartridge door was open.

Firmware revision mismatch

Solution: Contact HP support for service.

Go to: www.hp.com/support.

If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.

Cause: The revision number of the product firmware did not match the revision number of the software.

Memory is full

Solution: Try making fewer copies at a time.

Cause: The document you were copying exceeded the memory of the product.

Scanner failure

Solution: Turn off the product and then turn it on again. Restart your computer and then try to scan again.

If the problem persists, try plugging the power cord directly into a power outlet rather than a surge protector or power strip. If the problem continues, contact HP support. Go to www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.

Cause: The product was busy or an unknown cause interrupted your scan.

150 Troubleshooting

Page 153
Image 153
HP C4472, C4485, C4435, C4440 manual Door open, Firmware revision mismatch, Memory is full, Scanner failure