Troubleshooting

Chapter 13

Print troubleshooting

Use this section to solve these printing problems:

Envelopes print incorrectly

Borderless printing produces unexpected results

The product is not responding

The product prints meaningless characters

Nothing happens when I try to print

The pages in my document came out in the wrong order

The margins are not printing as expected

Text or graphics are cut off at the edge of the page

A blank page came out while printing

Ink is spraying the inside of the product when I print a photo

Envelopes print incorrectly

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Load the stack of envelopes correctly

Solution 2: Check the envelope type

Solution 3: Tuck the flaps to avoid paper jams

Solution 1: Load the stack of envelopes correctly

Solution: Load a stack of envelopes in the input tray, with the envelope flaps facing up and to the left.

Make sure that you remove all paper from the input tray before loading the envelopes.

For more information, see:

Load envelopes” on page 24

Cause: A stack of envelopes was loaded incorrectly.

If this did not solve the issue, try the next solution.

116 Troubleshooting

Page 119
Image 119
HP C4440, C4485, C4472 Print troubleshooting, Envelopes print incorrectly, Solution 1 Load the stack of envelopes correctly