Solution 3: Disconnect and reconnect the USB cable

Solution: Disconnect the USB cable from the computer and product, and then reconnect it.

To disconnect and reconnect the USB cable

1.Disconnect the USB cable from the product.

2.Disconnect the USB cable from the computer.

3.Leave the USB cable disconnected for 5-6 seconds.

4.Reconnect the USB cable to the product and the computer.

Troubleshooting

After reconnecting the USB cable, the product should start printing the jobs in queue.

NOTE: If you are connecting the product through a USB hub, make sure the hub is turned on. If the hub is on, try connecting directly to your computer.

5.If the product does not start printing automatically, start another print job. Cause: The USB cable needed to be disconnected.

If this did not solve the issue, try the next solution.

Errors 167

Page 170
Image 170
HP C4435, C4485, C4472, C4440 Solution 3 Disconnect and reconnect the USB cable, To disconnect and reconnect the USB cable