Chapter 13

Troubleshooting

4.Plug the power cord directly into a power outlet.

1Power connection

2Power cord and adaptor

3Power outlet

5.Try to print from your computer.

If the product prints when plugged directly into a power outlet while disconnected from any power strips or surge suppressors, the power strip or surge suppressor might not be allowing sufficient voltage to reach the product.

6.If the product cannot print and the print carriage is still stalled, contact HP support for service.

Go to: www.hp.com/support.

If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.

Cause: There might not be sufficient voltage for the product.

If this did not solve the issue, try the next solution.

146 Troubleshooting

Page 149
Image 149
HP C4472, C4485, C4435, C4440 manual Plug the power cord directly into a power outlet