HP C4472 Solution 7 Stop and restart the print spooler, To stop and restart the print spooler

Troubleshooting

Chapter 13

Solution 7: Stop and restart the print spooler

Solution: Restart the print spooler.

To stop and restart the print spooler

1.On the Windows taskbar, click Start, and then click Control Panel.

2.Double-click Administrative Tools, and then double-click Services.

3.Scroll down the list and click Print Spooler, and then click Stop to stop the service.

4.Click Start to restart the service, and then click OK.

5.Restart the computer and try printing again after the computer has restarted.

Cause: The print spooler needed to be restarted.

If this did not solve the issue, try the next solution.

Solution 8: Verify whether the software application has a problem

Solution: Verify whether the software application is the problem.

To verify the software application

1.Close the software application and reopen it.

2.Try to print again from the software application.

NOTE: The printer might not support printing from a DOS application. Determine if the software application is Windows-based or DOS-based by checking the system requirements of the application.

3.Try printing from Notepad to see if the issue is the software application or the driver.

To print from Notepad

a. On the Windows taskbar, click Start, and then click Programs or All Programs.

b. Click Accessories, and then click Notepad. c. Type a few characters of text into Notepad. d. Click File, and then click Print.

4.If printing is successful from Notepad but not the software application, contact the manufacturer of that application for support.

Cause: The software application failed or could not interface with the print driver .

170 Troubleshooting