6.Check the USB cable to make sure it is functioning properly.

NOTE: If you are using an older cable, it might not be working properly. Try connecting it to another product to see if the USB cable works. If you experience problems, the USB cable might need to be replaced. Also verify that the cable does not exceed 3 meters (9.8 feet) in length.

7.If another USB cable is available, try using that one instead.

8.Restart the computer.

9.After the computer restarts, try to scan again.

Cause: The power cord or USB cable was not attached properly. If this did not solve the issue, try the next solution.

Solution 3: Restart the computer

Solution: Restart the computer.

Cause: You might not have restarted the computer after installing the product software. Or, there might have been another problem with the computer.

If this did not solve the issue, try the next solution.

Solution 4: Uninstall and reinstall the product

Solution: Uninstall the product from the Printers and Faxes control panel and then reinstall it.

To uninstall and reinstall the product

1.Disconnect the USB cable between the product and the computer.

2.On the Windows taskbar, click Start, Printers and Faxes.

3.Right-click the product and select Delete.

4.Wait several seconds, and then reconnect the product to the computer with the USB cable.

5.Follow any onscreen prompts to reinstall the product.

Cause: There might have been a problem when you originally installed the product. If this did not solve the issue, try the next solution.

Solution 5: Uninstall and reinstall the HP Photosmart Software

Solution: Uninstall the complete HP Photosmart Software from the computer and then reinstall it using the CD that came with your product.

Troubleshooting

To uninstall and reinstall the software

1.On the Windows taskbar, click Start, Settings, Control Panel.

2.Double-clickAdd/Remove Programs.

Errors 173

Page 176
Image 176
HP C4485 Solution 3 Restart the computer, Solution 4 Uninstall and reinstall the product, Double-clickAdd/Remove Programs