HP C4440, C4485, C4472 Uninstall and reinstall the software, Registration screen does not appear

Models: C4435 C4472 C4440 C4485

1 243
Download 243 pages 17.98 Kb
Page 99
Image 99

Chapter 13

4.Click Retry to retry the connection.

5.Continue with the installation and restart the computer when prompted.

Cause: The USB connection between the product and the computer failed.

The registration screen does not appear

Solution: You can access the registration (Sign up now) screen from the Windows taskbar by clicking Start, pointing to Programs or All Programs, HP, Photosmart C4400 series, and then clicking Product Registration.

Cause: The registration screen did not launch automatically.

Troubleshooting

Uninstall and reinstall the software

If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and then reinstall the software. Do not simply delete the HP All-in-One application files from your computer. Make sure to remove them properly using the uninstall utility provided when you installed the software that came with the HP All-in-One.

To uninstall and reinstall the software

1.On the Windows taskbar, click Start, Settings, Control Panel (or just Control Panel).

2.Double-clickAdd/Remove Programs (or click Uninstall a program).

3.Select HP Photosmart All-In-One Driver Software, and then click Change/ Remove.

Follow the onscreen instructions.

4.Disconnect the product from your computer.

5.Restart your computer.

NOTE: It is important that you disconnect the product before restarting your computer. Do not connect the product to your computer until after you have reinstalled the software.

96 Troubleshooting

Page 99
Image 99
HP C4440, C4485, C4472, C4435 manual Uninstall and reinstall the software, Registration screen does not appear