HP C4435, C4485, C4472, C4440 Print quality troubleshooting, Wrong, inaccurate, or bleeding colors

Models: C4435 C4472 C4440 C4485

1 243
Download 243 pages 17.98 Kb
Page 102
Image 102

purchase. HP papers are designed for the best quality results. In addition, follow these tips:

Do not use paper that is too thin, that has a slick texture, or that stretches easily. It can feed incorrectly through the paper path, causing paper jams.

Store photo media in its original packaging inside a resealable plastic bag on a flat surface in a cool, dry place. When you are ready to print, remove only the paper you plan to use immediately. When you have finished printing, return any unused photo paper to the plastic bag.

Do not leave unused photo paper in the input tray. The paper might start to curl, which might reduce the quality of your printouts. Curled paper can also cause paper jams.

Always hold photo paper by the edges. Fingerprints on photo paper can reduce print quality.

Do not use paper that is heavily textured. It can cause graphics or text to print improperly.

Do not combine different paper types and paper sizes in the input tray; the entire stack of paper in the input tray must be the same size and type.

Store printed photos under glass or in a storage book to prevent bleeding over time from high humidity.

Print quality troubleshooting

Use this section to solve these print quality problems:

Wrong, inaccurate, or bleeding colors

Ink is not filling the text or graphics completely

The printout has a horizontal band of distortion near the bottom of a borderless print

Printouts have horizontal streaks or lines

Printouts are faded or have dull colors

Printouts seem blurry or fuzzy

Printouts have vertical streaks

Printouts are slanted or skewed

Ink streaks on the back of the paper

Paper is not picked up from the input tray

The text edges are jagged

Troubleshooting

Wrong, inaccurate, or bleeding colors

If your printout has one of the following print quality problems, try the solutions in this section for help.

Colors look different than what you expected.

For example, the colors in your graphic or photo look one way on your computer screen but print out differently, or magenta was replaced with cyan in your printout.

Colors run into each other, or look like they are smeared on the page. The edges might have a feathering appearance instead of being sharp and defined.

Print quality troubleshooting

99

Page 102
Image 102
HP C4435, C4485, C4472, C4440 manual Print quality troubleshooting, Wrong, inaccurate, or bleeding colors