For more information, see:

Load full-size paper or small-size photo paper” on page 20

Recommended papers for printing and copying” on page 18

Cause: You were trying to make a borderless copy without using photo paper.

Scan troubleshooting

Use this section to solve these scan problems:

Scan halts

Scan fails

Scan fails because of insufficient computer memory

Scanned image is blank

Scanned image is incorrectly cropped

Scanned image has incorrect page layout

Scanned image shows dotted lines instead of text

Text format is incorrect

Text is incorrect or missing

The scan feature does not work

Scan halts

Solution: Turn off the product and then turn it back on. Turn off the computer and then turn it back on.

If this does not work, try changing the scan to a lower resolution. Cause: The computer system resources might have been low.

Troubleshooting

Scan fails

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Turn on your computer

Solution 2: Connect your computer to the product with a standard USB cable

Solution 3: Install the HP Photosmart software

Solution 4: Start the HP Photosmart software

Solution 1: Turn on your computer

Solution: Turn on your computer.

Cause: The computer was not turned on.

If this did not solve the issue, try the next solution.

Scan troubleshooting

139

Page 142
Image 142
HP C4435, C4485, C4472, C4440 manual Scan troubleshooting, Scan fails, Scan halts, Solution 1 Turn on your computer