HP C4485, C4472, C4435, C4440 manual Change copy speed or quality, To change the copy quality

Models: C4435 C4472 C4440 C4485

1 243
Download 243 pages 17.98 Kb
Page 60
Image 60

4.Press the button next to Copies to increase the number of copies. When you reach the maximum, the setting returns to 1 copy.

TIP: Use the software that you installed with the product to set a higher number of copies. When the number of copies is greater than 9, only the last digit of the number of copies is displayed on the control panel.

5.Press OK.

6.Press the button next to Start Copy Black or Start Copy Color.

In this example, the product makes six copies of the original 10 x 15 cm (4 x 6 inch) photo.

Related topics

Use the HP Photosmart Software” on page 7

Change copy speed or quality

The HP All-in-One, provides three options, indicated by one, two, or three stars, that affect copy speed and quality:

One star copies faster than the other two quality settings. On plain paper, the text is comparable to the quality of two stars, but the graphics might be of lower quality. This setting uses less ink and extends the life of your print cartridges.

NOTE: This setting is not available when the HP All-in-One detects photo paper.

Two stars delivers high-quality output and is the recommended setting for most of your copying. Two stars copies faster than the three stars quality setting.

Three stars produces the highest quality output for all paper and eliminates the banding (striping) effect that sometimes occurs in solid areas. Three stars copies slower than the other quality settings.

Use the copy features

To change the copy quality

1.Load paper in the input tray.

Change the copy settings for the current job

57

Page 60
Image 60
HP C4485, C4472, C4435, C4440 manual Change copy speed or quality, To change the copy quality