HP C4440, C4485, C4472, C4435 manual Solution 7 Contact HP support for service

Models: C4435 C4472 C4440 C4485

1 243
Download 243 pages 17.98 Kb
Page 151
Image 151

Chapter 13

3.Open the print cartridge door.

The print carriage should move to the far right side of the product.

4.Remove the print cartridges and keep them aside carefully.

5.Close the print cartridge door.

6.Disconnect the power cord from the product and wait for 60 seconds.

7.Reconnect the power cord to the product.

8.Turn on the product by pressing the On button.

9.Open the print cartridge door.

Troubleshooting

The print carriage should move to the far right side of the product.

10.Reinsert the print cartridges in the appropriate slots.

11.Close the print cartridge door.

12.Load paper in the input tray.

13.If prompted, print a cartridge calibration page, and then scan it.

Cause: The product experienced an error and had to be reset.

If this did not solve the issue, try the next solution.

Solution 7: Contact HP support for service

Solution: If you have completed all of the steps provided in the previous solutions and are still having a problem, contact HP support for service.

Go to: www.hp.com/support.

If prompted, choose your country/region, and then click Contact HP for technical support.

Cause: You might need assistance to enable the product or software to function properly.

148 Troubleshooting

Page 151
Image 151
HP C4440, C4485, C4472, C4435 manual Solution 7 Contact HP support for service