HP De s k J e t 6 9 0 C S e rie s P rin t e rs | P ro d u c t P e rf o rman c e S p e c if ic at io n s |
Product Performance Specifications
HP DeskJet 690C series printers print a 600x300 dot size. Dots are placed on a 600x300 grid. Depletion is used to remove approximately 10% of the dots to prevent laying too much ink on the page.
In the Best mode, the paper advances at 600 DPI increments and places dots on a true 600x600 grid. Depletion in the Best mode removes approximately 43% of the dots.
To conserve memory, DOS fonts are stored at 300x300. REt is used to convert them to 600x300.
When printing from MS Windows, resolution determinations are made in the PC and then sent to the printer.
MS Windows Print Speed
|
|
| EconoFast Mode | Normal Mode | Best Mode |
Black | Speed 1 | 5 pages per minute | 3 pages per minute | 1 page per minute | |
Color | Speed 1 | 1.7 pages per minute | 0.8 pages per minute | 0.3 pages per minute | |
(black and color |
|
|
| ||
cartridges) |
|
|
|
| |
Color | Speed 1 |
|
|
| |
(photo and color | Up to 4 minutes per page (5 x 7 photo) | ||||
cartridges) |
|
|
|
| |
|
|
|
|
|
|
1.Approximate figures. Exact speed will vary depending upon system configuration, software program, and document complexity.
2.Approximate figures. Exact speed will vary depending upon system configuration, software program, and photo complexity.
MS DOS Print Speed (Black Mechanism)
| EconoFast Mode | Normal Mode |
Black Print Speed 1 | 270 CPS at 10 CPI | 134 CPS at 10 CPI |
|
|
|
1.Approximate figures. Exact speed will vary depending upon the system configuration, software program, and document complexity.
