2 Cabling Storage Devices and Setting SCSI Addresses

Alternate Non-Duplex Configuration

External terminator

built into cable

C11

C14

SCSI Device

Shelf

SCSI Device

Shelf

SCSI A

SCSI C

SCSI B

SCSI D

Hot Swap

Subsystem

C20

Figure 2-6. Alternate Non-Duplex Configuration

In this example, eight devices are connected to one SCSI channel. If the SCSI controller, NOS or OS are limited to narrow (Fast) SCSI-2 addresses, a maximum of seven SCSI devices are allowed on a narrow SCSI-2 channel and this configuration is not supported. This configuration is not supported by the DAC card.

To change the SCSI addresses, see the “Setting SCSI Addresses” section. For internal cable part numbers, see the “Cabling Diagram Legend.”

22

Page 28
Image 28
HP D3604-90004 manual Alternate Non-Duplex Configuration, C11 C14