Troubleshooting
Chapter 12
Information on print cartridgesFor best results, use HP print cartridges. The following tips help maintain HP print cartridges and ensure consistent print quality.
•Keep all print cartridges in the original sealed packages until they are needed.
•Store print cartridges at room temperature
•Do not reattach the protective tape once it has been removed from the print cartridge. Reattaching the plastic tape might damage the print cartridge. Place the print cartridge in the product immediately after removing the plastic tape. If this is not possible, store it in a print cartridge protector or airtight plastic container.
•HP recommends that you do not remove the print cartridges from the product until you have replacement print cartridges available to install.
•Turn off the product from the control panel. Do not turn off the product by turning off a power strip or unplugging the power cord from the product. If you improperly turn off the product, the print carriage does not return to the correct position and the print cartridges can dry out.
•Do not open the print cartridge door unless necessary. This exposes the print cartridges to air, which reduces the life of the print cartridges.
NOTE: If you leave the print cartridge door open for a long period of time, the product will recap the print cartridges to protect them from exposure to air.
•It might be necessary to clean the print cartridges when you notice a significant decrease in print quality.
TIP: You might notice a decrease in print quality if the print cartridges have not been used for a long time.
•Do not clean the print cartridges unnecessarily. This wastes ink and shortens the life of the cartridges.
•Handle print cartridges carefully. Dropping, jarring, or rough handling during installation can cause temporary printing problems. If print quality is poor right after cartridge installation, allow half an hour for the print cartridge to recover.
For more information, see:
94 Troubleshooting