Appendix D
Regulatory model number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is
Declaration of conformity
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
Supplier’s Name: | DoC#: | |
Supplier’s Address: | 16399 West Bernardo Drive |
|
| San Diego, CA |
|
declares, that the product |
|
|
Product Name: | HP Officejet J4500 series |
|
Regulatory Model Number:1) |
| |
Product Options: | All |
|
Power Adapter: |
|
conforms to the following Product Specifications and Regulations:
SAFETY:
EMC:
TELECOM:
IEC
EN
CISPR 22:2005/ EN 55022: 2006 Class B
EN 55024:1998 +A1:2001 + A2:2003
EN
EN
FCC CFR 47, Part 15 Class B /
TBR 21: 19983)
FCC Rules and Regulations 47CFR Part 68
Supplementary Information:
1.This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The Regulatory Model Number is the main product identifier in the regulatory documentation and test reports, this number should not be confused with the marketing name or the product numbers.
2.This product complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC & the R&TTE Directive 1999/5/EC and carries the
3.This product complies with TBR21:1998, except clause 4.7.1 (DC characteristics), which complies with ES 203
4.This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
5.The product was tested in a typical configuration.
San Diego, CA, USA
July, 2007
Local contact for regulatory topics only:
EMEA:
USA :
166 Regulatory information
