Chapter 8

6.Clean the face and edges around the ink nozzle area with the swab, as shown below.

1 Nozzle plate (do not clean)

2 Face and edges around the ink nozzle area

CAUTION: Do not clean the nozzle plate.

7.Slide the ink cartridge back into the slot. Push the ink cartridge forward until it clicks into place.

8.Repeat if necessary for the other ink cartridge.

9.Gently close the ink cartridge door and plug the power cord into the back of the device.

Store printing supplies

The ink cartridge protector is designed to keep an ink cartridge secure and prevent it from drying out when it is not being used. Whenever you remove an ink cartridge from the device with the intention of using it again later, store it in the ink cartridge protector. For example, store the black ink cartridge in an ink cartridge protector if you are removing it so you can print high-quality photos with the photo and tri-color ink cartridges.

NOTE: If you do not have an ink cartridge protector, you can order one from HP Support. For more information, see Support and warranty. You can also use an air- tight container, such as a plastic tub. Make sure the nozzles are not touching anything when you store the ink cartridges.

108 Maintain and troubleshoot

Page 112
Image 112
HP J4660 manual Store printing supplies