Client: Installation for UNIX

Additional Procedures

while your request for a permanent license is being processed. The Start-up License is provided on a PC floppy disk and on paper.

If you wish to install the license from the PC floppy disk, you may need to mount the floppy on another computer and then transfer the Start-up License file to the computer on which you are installing Prolifics software, using a transfer file utility such as ftp. Copy the license.dat file to /usr/prolifics/licensesor to the /licenses subdirectory of your Prolifics installation.

Alternatively, enter the contents of license.dat from the paper copy provided.

The following additional procedures might be required to configure Prolifics on a UNIX system:

`If you are installing Prolifics as a UNIX client, you need to set several application variables and set up access to several configuration files for the client. For information on configuring the client environment, refer to page 38.

`If you are using a database other than JDB, you must edit the makefile and the database-specific file, and then rebuild Prolifics executables to link in support for your database. Refer to page 36 for information on creating new Prolifics executables.

32

2-Tier Installation