Web Application Server: Post-Installation for UNIX

Determine FileLocations

•Server — Full pathname of the jserver program in the util subdirectory of the installation directory.

•SMBASE — Full pathname of the Prolifics installation directory.

•PATH — Full pathname to the util subdirectory of the installation directory.

Determine the following:

`The location of your HTTP server’s program directory, such as /usr/web/ cgi–bin. Make a note of this for later reference:

The server’s program directory is installed at:

______________________________________________________

`That the Prolifics Web Setup Manager is installed on your HTTP server and ready to run via a web browser. The default URL location is: http://server- Name/program_directory/websetup. Make a note of its location for later reference:

The Setup Manager is accessed from the following URL:

______________________________________________________

Creating Your Web Application

The Prolifics Web Setup Manager guides you through configuring your customized web application. For more information, refer to the Web Developer’s Guide.

To run the Web Setup Manager, enter the URL recorded above into a web browser.

Verify the Installation

Web Application

Server

Installation

After you install and configure the Prolifics web application server, you should verify that it starts up properly on the web application server machine.

On the Prolifics web application server machine, verify the installation by running the Prolifics Gallery, and verify the configuration by running your own application.

To verify the Prolifics web application server installation:

Run the Prolifics Gallery:

`Start the Gallery application by typing the following on the command line in the Prolifics util directory:

monitor –start jwsamp

46

2-Tier Installation