License Manager Error Messages
FLEXlm Informational Messages
The following messages are generated by FLEXlm license management software, and are provided courtesy of the FLEXlm Programmer’s Guide.
Connected to node
Cause: This daemon is connected to its peer on node.
CONNECTED, master is name
Cause: License daemon logs this message when a quorum is achieved and everyone has selected a master.
DENIED: N feature to user (mm/dd/yy hh:mm)
Cause: user was denied access to N licenses of feature.
EXITING DUE TO SIGNAL nnn
EXITING WITH CODE nnn
Cause: An interrupt signal has been intercepted. All daemons list the reason that the daemon has exited.
EXPIRED: feature
Cause: feature has passed its expiration date.
IN: feature by user (N licenses) (used: d:hh:mm:ss)
Cause: user at d:hh:mm:ss.
IN server died: feature by user (N licenses) (used: d:hh:mm:ss)
Cause: user has checked in N licenses of feature by virtue of the fact that his server died.
License Manager server started
Cause: License daemon has been started.
Lost connection to host
Cause: A daemon can no longer communicate with its peer on node host, which can cause the clients to have to reconnect, or cause the number of daemons to go below the minimum number, in which case clients may start exiting. If license daemons lose the connection to the master, they will kill all vendor daemons; vendor daemons will shut themselves down.
Lost quorum
Cause: Not enough servers to satisfy quorum number. The daemon will process only connection requests from other daemons.
Action: Check network connection between servers.
86 |
