HP Panter 2Tier manual Lmhostid, Output from lmhostid is similar to the following

FLEXlm Utilities

lmhostid

Prints the correct hostid value on any machine supported by FLEXlm

lmhostid [type]

type

The type of the hostid to print. type must be one of long, idmodule, ether, or string, and is currently used only on HP and SCO systems. On HP, type specifies the ID module, the machine id as returned from the uname command, or the Ethernet address. The HP default is long–uname. On SCO, long specifies the pre-3.0 default, which was a 32-bit long int, while string specifies a string host, which is the new default.

Description	Output from lmhostid is similar to the following:
	lmhostid – Copyright (C) 1997, Globetrotter Software, Inc.
	The FLEXlm host ID of this machine is “1700abcd”

66 2-Tier Installation