Client:
`Ensure that libsti.ini (distributed in the config directory) resides in the Windows directory and contains the correct paths in it for the IPT variable.
`Ensure that libsti.dll (distributed in the util directory) can be found in a directory along the PATH.
If you are upgrading from JAM or an earlier version of Prolifics, remember that Prolifics’s util directory must be on your PATH. Normally, this is not an issue since the installation process inserts the Prolifics util directory at the beginning of the PATH variable. However, the PATH might contain the older util directory. If this is the case, manually edit the PATH specification in the autoexec.bat file to remove the older util directory.
Prolifics’s online help and manuals are built and displayed with DynaText by Inso Corporation. To verify that you can access the online documents,
Note: The setup program normally performs all of these steps for you.
`Ensure that the Prolifics util directory is included in the PATH variable.
`Ensure that the dynatext.ini resides in the Windows directory.
`Ensure that SMBASE is set to point to your Prolifics installation.
If DynaText was previously installed, you can use your existing DynaText configuration file (dynatext.ini) to include the Panther manuals with your existing list of documents.
Add the following to the COLLECTION line:
` Windows: In dynatext.ini: ProlificsInstallDir\docs = Panther
Chapter 2 Client: Windows Installation | 17 |