HP Serviceguard Storage Management Suite for VERITAS Installing the Veritas 5.1 SP1 Products

3 Installing the Veritas 5.1 SP1 Products

This chapter describes how to install VxFS 5.1 SP1 and VxVM 5.1 SP1 with the swinstall (1M) command. This chapter addresses the following topics:

•“Mounting the HP Serviceguard Storage Management Suite Media” (page 27)

•“Installing Veritas 5.1 SP1 Products” (page 27)

•“Installing VxFS 5.1 SP1” (page 28)

•“Installing VxVM 5.1 SP1” (page 29)

•“Installing CVM [B9117EB] on HP-UX 11i v3” (page 31)

•“Cold-Installing VxVM 5.1 SP1 and VxFS 5.1 SP1 with HP-UX 11i v3” (page 31)

•“Updating HP-UX and Veritas Products Using the update-uxCommand” (page 33) Prior to installing Veritas 5.1 SP1 products, ensure that you have met the following conditions:

•Verify that all the required patches are installed.

•OnlineJFS 4.1(B3929EA), OnlineJFS 5.0(B3929FB) and OnlineJFS 5.0.1(B3929GB) are removed from the system (if installed).

Mounting the HP Serviceguard Storage Management Suite Media

For a media-based installation, you must mount the media before starting the installation process. To mount the media, complete the following steps:

1.Insert the media into the drive, and log in as root by entering the following command: $ su root

For more information on the supported options, see su (1).

2.Scan for the device name, as follows:

If you are using the legacy I/O format, enter the following command:

# ioscan -fnC disk

For more information on the supported options, see ioscan (1M).

If you are using the new I/O format, enter the following command:

#ioscn -fNC disk

3.Create a mount point for the media, by entering the following command:

#mkdir -p /cdrom

For more information on the supported options, see mkdir (1).

4.Mount the media, by entering the following command:

# mount <absolute device-path> /cdrom

where <absolute device-path>is the device path for the CDROM. For more information on the supported options, see mount_vxfs (1M).

5.Verify that the media is mounted, by entering the following command:

# mount

For more information on supported options, see mount_vxfs (1M).

Installing Veritas 5.1 SP1 Products

Veritas 5.1 SP1 products are supported with HP-UX 11i v3 March 2011 OEUR and later. If you do not have the March 2011 OEUR, it is recommended that you upgrade the HP-UX version on

Mounting the HP Serviceguard Storage Management Suite Media 27